Do Fiberglass Pools Crack? Causes, Repair Options and When Resurfacing Makes Sense
Yes, fiberglass pools can crack. Most cracks homeowners find are in the gelcoat, the thin, hard, colored surface layer, and not in the fiberglass structure underneath. Those surface cracks are usually repairable and rarely mean the pool is failing. A small number of cracks do go deeper. Some keep coming back because something under or […]
How Long Do Fiberglass Pools Last? Signs It May Be Time to Resurface
How long do fiberglass pools last? A well-built fiberglass pool shell can remain structurally serviceable for 25 to 50 years or more. The gel coat surface you actually see and touch has a shorter working life, commonly showing meaningful wear somewhere between 10 and 20 years depending on conditions. Those are two different timelines, and […]
Pool Plaster Repair vs. Resurfacing: How to Know What Your Pool Needs
Standing at the edge of a pool with a crack in the floor or a wall that feels more like sandpaper than plaster, most Charleston homeowners ask the same question: can this be patched, or does the whole pool need to come out? Quick answer: Localized plaster damage, such as a single hairline crack, an […]
Can You Resurface a Fiberglass Pool?
Yes. A fiberglass pool can be resurfaced when the structural shell is sound and the gel coat has reached the end of its useful life. The process involves preparing the existing surface, repairing any damage to the fiberglass laminate, and applying a new coating that bonds directly to the shell. The answer used to be […]
Pool Resurfacing Near Me: How to Find the Right Contractor in Charleston, SC
If you are searching for pool resurfacing near me in Charleston, you are probably past the point of casual research. Your pool may feel rough underfoot, show stains that no longer brush away, have peeling or chalking on a fiberglass surface, or show cracks and worn plaster on a gunite or concrete shell. You want […]
Fiberglass Pool Resurfacing in South Carolina: A Complete Guide by Region and Climate
If you’re searching for a fiberglass pool resurfacing complete guide for South Carolina, the short answer is this: the state’s coastal, midlands, and upstate regions age fiberglass pool surfaces at different rates, and the right resurfacing approach depends on where your pool sits as much as how old it is. Salt air along the coast, […]
Why Is My Pool Losing Water? How to Tell If It’s Evaporation, a Leak, or a Surface Problem
Every pool loses water. The question is whether the amount you are losing is normal, or whether something is wrong and getting worse. Most guides frame this as a simple either/or: evaporation or leak. But after inspecting hundreds of pools across Charleston, Mount Pleasant, Summerville, and the surrounding Lowcountry, we have found that the real […]
How Often Should You Resurface a Pool?
Most pools need resurfacing every 5 to 15 years, but the real answer depends on the finish material, not the calendar. Traditional plaster in Charleston’s coastal climate typically lasts 5 to 8 years. Fiberglass gel coat holds up for 8 to 12 years before chalking and oxidation become serious. ecoFINISH thermo-polymer coatings carry a 10-year […]
Can You Paint a Fiberglass Pool? (And Why You Shouldn’t)
If you’ve been staring at a chalky, faded fiberglass pool shell and wondering whether a fresh coat of paint could solve the problem, you’re not alone. It’s one of the most common questions we hear from homeowners across the Charleston Lowcountry. The short answer is yes, you technically can paint a fiberglass pool. The more […]
Fiberglass Pool Resurfacing in Myrtle Beach, SC: Gelcoat Failure to Complete Restoration
The Problem: A Fiberglass Pool That Had Reached Its Limit The homeowner in Myrtle Beach contacted us about a freeform fiberglass pool that had been showing its age for several years. The gel coat, which is the factory-applied resin finish that gives fiberglass pools their color and smooth surface, had deteriorated to the point where […]