Can You Resurface a Pool Yourself? DIY vs Professional Resurfacing

You can resurface a pool yourself in limited circumstances, usually small cosmetic repairs or manufacturer-approved DIY coating kits on a sound, correctly identified surface. Full resurfacing is a different matter. Plaster application, thermo-polymer coatings, and structural repair all require specialist equipment, controlled application, and experience that off-the-shelf products do not replace. Contractor websites tell you […]
Can You Resurface a Fiberglass Pool?

Yes. A fiberglass pool can be resurfaced when the structural shell is sound and the gel coat has reached the end of its useful life. The process involves preparing the existing surface, repairing any damage to the fiberglass laminate, and applying a new coating that bonds directly to the shell. The answer used to be […]
Fiberglass Pool Resurfacing in South Carolina: A Complete Guide by Region and Climate

If you’re searching for a fiberglass pool resurfacing complete guide for South Carolina, the short answer is this: the state’s coastal, midlands, and upstate regions age fiberglass pool surfaces at different rates, and the right resurfacing approach depends on where your pool sits as much as how old it is. Salt air along the coast, […]
Why Is My Pool Losing Water? How to Tell If It’s Evaporation, a Leak, or a Surface Problem

Every pool loses water. The question is whether the amount you are losing is normal, or whether something is wrong and getting worse. Most guides frame this as a simple either/or: evaporation or leak. But after inspecting hundreds of pools across Charleston, Mount Pleasant, Summerville, and the surrounding Lowcountry, we have found that the real […]
How Often Should You Resurface a Pool?

Most pools need resurfacing every 5 to 15 years, but the real answer depends on the finish material, not the calendar. Traditional plaster in Charleston’s coastal climate typically lasts 5 to 8 years. Fiberglass gel coat holds up for 8 to 12 years before chalking and oxidation become serious. ecoFINISH thermo-polymer coatings carry a 10-year […]
Can You Paint a Fiberglass Pool? (And Why You Shouldn’t)
If you’ve been staring at a chalky, faded fiberglass pool shell and wondering whether a fresh coat of paint could solve the problem, you’re not alone. It’s one of the most common questions we hear from homeowners across the Charleston Lowcountry. The short answer is yes, you technically can paint a fiberglass pool. The more […]
What Color Pool Finish Should You Choose? Complete Pool Finish Color Guide for 2026

Choosing a pool finish color is one of the most permanent decisions you will make during a pool build or renovation. Unlike deck furniture or landscaping, you cannot easily change a pool interior once it is filled. The color you choose shapes the water’s appearance, sets the tone for your entire outdoor space, and affects […]
Fiberglass Pool Resurfacing: The Complete Homeowner’s Guide (2026)

By SC Pool Resurfacing | Serving Charleston, Myrtle Beach, Longs & All of South Carolina Your fiberglass pool looked sharp when it was installed. Now the surface is chalky, the color has washed out to a dull shade of whatever it once was, and the finish feels rough against bare skin. Maybe you’ve noticed hairline […]
Top Pool Problems Caused by Coastal Climate in South Carolina

South Carolina homeowners love their pools. With swim seasons stretching from April through October, a backyard pool is one of the best investments you can make in this climate. But that same climate is quietly destroying your pool surface. If you own a pool anywhere along the South Carolina coast — Charleston, Mount Pleasant, Hilton […]
What Is ecoFINISH® Pool Resurfacing? The Complete Guide for Pool Owners

If you’ve been researching pool resurfacing options, you’ve probably run into the name ecoFINISH®, and a lot of conflicting or incomplete information about what it actually is. This guide answers the question completely. By the end, you’ll understand exactly what ecoFINISH is, how it’s applied, how it compares to plaster and other finishes, what it […]