Projects / Goose Creek, SC
A bowed fiberglass floor cut, repaired and resurfaced in ecoFINISH® Ice Ice Bay Bay, completed in three days.
Not every pool resurfacing project is as simple as applying a new finish. We recently completed a fiberglass pool restoration in Goose Creek, South Carolina, where the pool floor had bowed upward and needed repairs before resurfacing could begin.
Our team at SC Pool Resurfacing cut through the affected section, completed the necessary fiberglass repairs and restored the floor to a flat, even surface. We then resurfaced the pool with ecoFINISH® in the Ice Ice Bay Bay color, giving the interior a fresh blue appearance.
The entire project, including the floor repairs and resurfacing, was completed in just three days.
The before, during and after photos below show how we approached the damaged floor and the finished result.
The biggest issue with this pool was the floor. A section had bowed upward, leaving an uneven area that needed more than a new surface coating.
Fiberglass pools can develop problems for different reasons, including movement around the shell or pressure beneath it. However, the cause of a raised floor needs to be assessed for each individual pool. You cannot determine the underlying problem simply by looking at a photo.
For this Goose Creek project, our team needed to address the raised section before moving forward with the resurfacing work.
Applying a fresh coating over the existing floor would have left the uneven area in place. Repairing the floor first allowed us to prepare a flatter surface for the new finish.
The original project photos show the pool before restoration, including the condition of the interior and the areas where repair work was required.
With the pool drained and the affected area accessible, our team began working on the bowed section.
The repair involved cutting through the raised portion of the floor and completing fiberglass repairs to bring it back to a flat, even condition. This was an important part of the project because the floor needed attention before the resurfacing process could continue.
Our progress photos show the repair area, the work taking place inside the pool and the preparation involved before applying the new coating.
This is why we always recommend having unusual floor movement, cracks or surface damage assessed before deciding on resurfacing alone. Some pools may only need localized repairs, while others require more extensive work.
If you’re dealing with similar damage, learn more about our pool surface repair services in Charleston, SC.
Once the floor repairs were completed, our crew continued preparing the fiberglass interior for its new coating.
Surface preparation is an important part of any fiberglass pool resurfacing project. The existing surface and repaired areas must be properly prepared before the new finish is applied. A fresh color can improve a pool’s appearance, but it should never be used to hide damage that still needs attention.
For this project, we applied ecoFINISH® in Ice Ice Bay Bay, a light blue finish that gave the pool a clean, refreshed appearance.
The photos taken during application show our crew working across the interior with specialized coating equipment. The final images show the new finish covering the pool floor, walls, steps and other interior surfaces.
You can explore our fiberglass pool resurfacing services to learn more about the coating options available for aging or damaged fiberglass pools.
The difference between the original pool and the finished surface is easy to see in the photos.
What started as a pool with a bowed floor and an aging interior was transformed into a freshly resurfaced swimming pool with a smooth-looking, consistent blue finish.
The final photographs were taken while the pool was still empty, allowing homeowners to see the Ice Ice Bay Bay coating across the interior. The color’s appearance may vary once the pool is filled with water.
What makes this Goose Creek project worth sharing is the repair work behind the finished appearance. Our crew didn’t simply change the pool’s color. We addressed the raised floor, completed the fiberglass repairs and then applied the new finish.
And we completed all of that work in three days.
If you own a fiberglass pool in Goose Creek, it’s worth paying attention to unusual floor movement, cracks, blistering, rough areas or a finish that has started to deteriorate.
These problems don’t always require the same solution. A professional inspection can help determine whether your pool needs a localized repair, more extensive fiberglass work or complete resurfacing.
At SC Pool Resurfacing, we work with homeowners throughout Goose Creek, Charleston, Mount Pleasant, Summerville and surrounding Lowcountry communities.
Learn more about our pool resurfacing services in Goose Creek, SC, or browse our project gallery to see more examples of completed work.
Goose Creek, South Carolina
Fiberglass swimming pool
Bowed-up pool floor
Fiberglass floor repairs and full pool resurfacing
ecoFINISH® – Ice Ice Bay Bay
3 days
Click any photo to view it full size.
See more completed work on our projects page.
If your fiberglass pool has a bowed floor, cracks, blistering or a worn finish, contact SC Pool Resurfacing to discuss its condition. We can assess the surface, explain the available repair options and recommend an appropriate approach.
Request your free on-site pool resurfacing estimate today. Call 854-444-9416 or contact our team online to get started.