If you see raised bubbles on the walls, steps, or floor of your fiberglass pool, the problem may be osmotic blistering, failing paint, a poorly bonded coating, or damage within the fiberglass itself. These defects can look similar, but they do not all require the same repair. A few small blisters do not automatically mean the pool is unsafe or needs a new shell. What matters is which layer has lifted, whether the surrounding fiberglass is sound, and whether the damage is changing. Here’s how to recognize the warning signs and decide what to do next.
Are the Bubbles in Your Pool Water or the Fiberglass Surface?
First, distinguish moving air bubbles from raised areas that stay attached to the pool. Tiny bubbles circulating through the water, especially near return jets, may be related to the circulation system. They are not, by themselves, evidence of damaged fiberglass.
Surface blisters remain in one place. They may look like rounded bumps, swollen patches, or small domes on the steps, floor, or walls. Some feel firm; others appear slightly flexible. You cannot tell from appearance alone whether the problem affects a coating, the original gelcoat, or deeper fiberglass layers.
What Causes Blisters on a Fiberglass Pool?
Osmosis beneath the gelcoat
Many traditional fiberglass pools have an interior gelcoat over layers of fiberglass reinforcement and resin. Gelcoat resists water, but it is not a perfect barrier to individual water molecules. Moisture can gradually pass through and reach soluble substances or small voids beneath the finish. The resulting concentrated solution draws in more moisture through osmosis. Pressure builds inside the confined pocket until the surface rises into a blister.
In some cases, water also reacts with susceptible resin components, a process called hydrolysis. The WEST SYSTEM guide to gelcoat blisters explains the underlying behavior in fiberglass laminates, although its repair guidance is written for boats rather than swimming pools.
Failed paint or an earlier coating
If the pool was painted or resurfaced before, the visible bubbles may be in that added layer rather than the original shell. Poor adhesion, trapped moisture, inadequate preparation, or incompatible materials can cause a coating to lift.
Manufacturing voids and fiberglass delamination
Small voids, gelcoat irregularities, or incomplete bonding during original manufacturing can contribute to raised spots later. Delamination means separation between layers of the fiberglass laminate. It may require more extensive repair than an isolated finish defect. A broad, raised floor or distorted wall is different again: movement, support conditions, or pressure outside the shell may be involved.
Are Fiberglass Pool Blisters Cosmetic or Structural?
A small number of intact gelcoat blisters may be primarily a surface concern, particularly if the surrounding fiberglass is firm and stable. They do not automatically mean the shell is leaking or about to fail. But widespread separation, deep cracking, abnormal flexing, and changes in the pool’s shape deserve greater attention.
| What you notice | What it could mean | Sensible next step |
|---|---|---|
| A few stable, intact bumps | Localized gelcoat or coating defect | Document and arrange an assessment; monitoring may be reasonable |
| New clusters or peeling finish | Wider coating failure or blistering | Schedule a surface inspection |
| Exposed fibers, deep cracks, soft spots, or a springy floor | Possible laminate deterioration | Avoid affected areas and arrange prompt professional assessment |
| A bowed floor, moving wall, or unexplained water loss | Possible support, structural, or leak issue | Stop using the pool if safety is uncertain and seek specialist advice |
These are clues, not diagnoses. A photograph cannot confirm the condition of hidden fiberglass. If sharp fibers are exposed or steps and floors appear unstable, keep swimmers out until the pool has been checked.
What Should You Do When You First Notice Fiberglass Pool Blisters?
Take a close-up photograph and another showing where the defect sits in the pool. Note when you first saw it, whether similar spots are appearing, and whether the pool has previously been painted or repaired.
Do not puncture a blister, grind the surface, or cover an unexplained raised area with putty or paint. Opening a defect can expose damaged material and complicate repairs. Do not drain an inground fiberglass pool yourself to get a better look. If the pool is relatively new, ask the original manufacturer or installer about warranty inspection requirements before authorizing invasive work.
Can Fiberglass Pool Blisters Be Repaired Without Resurfacing the Whole Pool?
Yes, sometimes. If damage is limited to a small area and the surrounding gelcoat and laminate remain sound, a localized repair may be appropriate. A qualified repairer can determine which defective material needs removing, whether drying is necessary, and which compatible materials should restore the affected area.
A patch may not match an older finish perfectly, and it cannot prevent a separate blister from developing elsewhere. See SC Pool Resurfacing’s pool surface repair services for the types of surface problems the company evaluates.
When Does a Fiberglass Pool Need Full Resurfacing?
Full resurfacing becomes worth considering when blisters cover large sections of the pool, previous coatings are failing widely, or the existing finish is too deteriorated for scattered patches to be practical. The goal is to provide a suitable new finish over a properly prepared, repairable shell, not to conceal existing damage.
Unsound coatings must be removed as required, affected fiberglass repaired, and any structural or support problem addressed before the new coating goes on. If the laminate is severely damaged, resurfacing alone may not be suitable. The scope should follow the inspection findings, not the number of bubbles alone.
How Do Professionals Inspect a Bubbling Fiberglass Pool?
A useful assessment starts with the pool’s history: its approximate age, previous finishes, repairs, and when the blisters appeared. A few raised spots on a step present a different question from a large floor bulge or widespread wall deterioration.
Depending on the condition, a professional may check coating adhesion, look for cracks and movement, assess likely moisture problems, or inspect representative affected areas as part of a controlled repair plan. Moisture readings by themselves do not prove osmosis. Ask the contractor to explain which layer appears damaged, what remains uncertain, and whether further problems could be revealed during preparation.
Before accepting a quote, find out which repairs are included, how additional work would be approved, how draining risks will be managed, and what any written warranty actually covers.
Can polyFIBRO® Resurfacing Help a Damaged Fiberglass Pool?
For a fiberglass pool with a sound or repairable shell, ecoFINISH® polyFIBRO® may be one option for the new interior finish. It is a thermally applied polymer coating designed for fiberglass pool surfaces. SC Pool Resurfacing provides fiberglass pool resurfacing in Charleston using this system.
Preparation and repair come first. A new coating does not rebuild damaged fiberglass, restore lost shell support, or resolve an external groundwater problem. In a documented fiberglass pool floor repair in Goose Creek, SC Pool Resurfacing repaired a bowed floor before applying an ecoFINISH® finish. Its published project record says the repair and resurfacing were completed in three days. That project demonstrates the importance of repairing the underlying problem; it is not an example of a confirmed osmosis repair.
The manufacturer publishes a 10-year limited residential product warranty subject to conditions. It covers qualifying product-material defects, not installation workmanship, existing shell damage, or related labor costs. Ask which warranty applies to your proposed job and request the terms in writing.
Why Draining a Fiberglass Pool Requires Care in Charleston
An inground fiberglass pool relies partly on the balance of forces acting on its shell. When water is removed, groundwater outside the pool may exert pressure against the empty structure. On a property with high groundwater, particularly after heavy rain, that can contribute to bowed walls, a lifted floor, or other serious movement.
Groundwater conditions vary from property to property across Charleston and the surrounding Lowcountry. A coastal address does not prove that groundwater caused the blisters. Before any draining for inspection or resurfacing, a qualified professional should review site conditions and the pool manufacturer’s instructions. Never empty the pool simply to investigate a few bumps.
How Much Does Fiberglass Pool Blister Repair Cost?
There is no dependable fixed price without knowing what is damaged. A handful of superficial defects may involve much less work than extensive gelcoat removal, laminate repair, or resurfacing the entire interior. Pool dimensions, site access, existing paint, necessary drying, and groundwater precautions also affect the scope.
Compare written estimates carefully. Ask what surface preparation and repairs are included, which coating will be used, who handles draining and refilling, and how unexpected damage will be priced and approved.
Can You Prevent Fiberglass Pool Blisters?
Follow the shell or finish manufacturer’s water-care guidance, avoid letting concentrated pool chemicals sit against the surface, and have chips or cracks assessed before they worsen. Good maintenance protects the finish, but it cannot eliminate every manufacturing defect or prevent all moisture-related problems inside a laminate. If blisters have already appeared, the priority is identifying the cause rather than hiding them under another coating.
Frequently Asked Questions
Will fiberglass pool blisters go away on their own?
A blister may change shape, but that does not mean the separated material has healed. A few stable defects might be monitored after assessment; spreading or damaged areas need closer attention.
Can I keep swimming if my fiberglass pool has blisters?
A few intact surface blisters do not automatically make the pool unsafe. However, keep people out if there are sharp exposed fibers, unstable steps, significant cracks, or signs of shell movement. Water quality must also be safe.
Can I pop or paint over a fiberglass blister?
No. Puncturing can expose underlying material, and painting over a raised defect does not repair what caused it. Ask a qualified professional to identify the affected layer.
Can a few blisters be repaired without full resurfacing?
Often, yes, if the damage is localized and the surrounding material is sound. The right choice depends on inspection findings, not just the number of visible blisters.
Does blistering mean my fiberglass pool is leaking?
Not necessarily. Blister fluid can be trapped within surface layers without a through-shell leak. Unexplained water loss still needs a separate investigation by an appropriate specialist.
Is fiberglass pool blister repair covered by a warranty?
Possibly. The original pool manufacturer may have a shell or surface warranty, while a resurfacing product and its installer may have separate terms. Coverage depends on the actual policy, age, cause, and required claim procedures. Check before authorizing repairs.
Get Your Fiberglass Pool Assessed in Charleston, SC
If you’ve found raised spots, peeling, or unusual movement in your fiberglass pool, start with an assessment rather than assuming it needs a complete new finish. SC Pool Resurfacing works with homeowners in Charleston and surrounding Lowcountry communities to evaluate pool surfaces and discuss repair or resurfacing options where appropriate. Some problems may also require additional specialist investigation.
Request a Free On-Site Pool Assessment or call 854-444-9416 to discuss what you’re seeing.